Tatze Pedal Contact CNC Large - Blue

A pedal should fit your foot on the one hand and meet your requirements on the other. Therefore, the CONTACT CNC is available in different sizes, different colors and with double-sided PINS. These are screwed in the delivery state with the short side up, but who likes it particularly aggressive can turn the PINS and thus extend.

In CONTACT CNC Large, great emphasis was placed on stability and yet the pedal with 350g for its size is a lightweight.

Unwanted ground contact avoids the pedal by the thin design and the open design allows dirt to fall through the pedal.

In the bearing of the CONTACT CNC we use a high-quality IGUS JSM plain bearing inside and two ball bearings outside. For sealing, two double lip seal rings are installed, which protected the bearings from dirt and moisture.

Here are the specifications at a glance:

• Platform for shoe size 42 - 50
• 10 grippy and concave arranged PINS
• Pedal body made of aluminum 6061-T6
• High strength steel axle
• Bearing: IGUS plain bearing + 2x deep groove ball bearing (double sealed)
• Weight: 350g